Home » RDBMS Server » Backup & Recovery » after restore when trying to recover database.. it gives error (ORACLE 11G; AIX.)
after restore when trying to recover database.. it gives error [message #615334] Mon, 02 June 2014 11:20 Go to next message
cakeday
Messages: 31
Registered: May 2010
Member
i am refreshing a test environment from a produciton environment.
I am doing it in 3 steps. i am getting an error when trying to recover the database. PLEASE HELP.

Step 1:Restore control file.

THIS RUNS SUCCESSFUL.

Step 2:Restore the Database.

I am using the following script to do so..
rman target / << EOF

run
{
allocate channel t1 type 'sbt_tape' parms 'ENV=(TDPO_OPTFILE=/p076/admin/adsmagent/tdpo.opt)';
set until time "to_date('28-may-2014 18:31:00','dd-mon-yyyy hh24:mi:ss')";
SET NEWNAME FOR DATAFILE '/p089/data001/itas001_data_001.dbf' TO '/p076/data001/itas001_data_001.dbf';
SET NEWNAME FOR DATAFILE '/p089/data001/patrolkm_data_00.dbf' TO '/p076/data001/patrolkm_data_00.dbf';
SQL "ALTER DATABASE RENAME FILE ''/p089/redob/redob_009.log'' TO ''/p076/redob/redob_009.log'' ";
SQL "ALTER DATABASE RENAME FILE ''/p089/redoa/redoa_010.log'' TO ''/p076/redoa/redoa_010.log'' ";
SQL "ALTER DATABASE RENAME FILE ''/p089/redob/redob_010.log'' TO ''/p076/redob/redob_010.log'' ";
restore database;
release channel t1;
}
EOF

THIS RUNS SUCCESSFUL TOO!

Step 3:recover the database.

Script:

rman target / << EOF
run
{
allocate channel t1 type 'sbt_tape' parms 'ENV=(TDPO_OPTFILE=/p076/admin/adsmagent/tdpo.opt)';
set until time "to_date('28-may-2014 18:31:00','dd-mon-yyyy hh24:mi:ss')";
recover database;
release channel t1;
}
EOF

ERROR:I am getting the following error when i run this,
Database dismounted.
ORACLE instance shut down.
SQL> ORACLE instance started.

Total System Global Area 1.3362E+10 bytes
Fixed Size 2234120 bytes
Variable Size 4395632888 bytes
Database Buffers 8925478912 bytes
Redo Buffers 38498304 bytes
Database mounted.
SQL> Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Start of RMAN script.

Recovery Manager: Release 11.2.0.3.0 - Production on Mon Jun 2 09:10:50 2014

Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.

connected to target database: P089 (DBID=4262525727, not open)

RMAN>
RMAN> 2> 3> 4> 5> 6> 7>
using target database control file instead of recovery catalog
allocated channel: t1
channel t1: SID=2091 device type=SBT_TAPE
channel t1: Data Protection for Oracle: version 7.1.0.0

Starting recover at 02-JUN-14
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 06/02/2014 09:10:55
RMAN-06094: datafile 1 must be restored

RMAN>

Recovery Manager complete.
end Mon Jun 2 09:10:56 PDT 2014
Re: after restore when trying to recover database.. it gives error [message #615336 is a reply to message #615334] Mon, 02 June 2014 11:30 Go to previous messageGo to next message
Michel Cadot
Messages: 68625
Registered: March 2007
Location: Nanterre, France, http://...
Senior Member
Account Moderator

You have to restore datafile 1.

Re: after restore when trying to recover database.. it gives error [message #615349 is a reply to message #615334] Mon, 02 June 2014 14:01 Go to previous messageGo to next message
John Watson
Messages: 8922
Registered: January 2010
Location: Global Village
Senior Member
You need SWITCH DATAFILE ALL in your step 2 script.
Re: after restore when trying to recover database.. it gives error [message #615350 is a reply to message #615334] Mon, 02 June 2014 15:13 Go to previous messageGo to next message
cakeday
Messages: 31
Registered: May 2010
Member
ok, so i was able to recover the database.

what i did was, i ran the following query..

select error from v$datafile_header;

And it came back saying, NO FILE FOUND.

SO i had to run a rename of the datafile again before i issued recover database. And it worked.

So now the DB is restored as well as recovered.
= = =

NOW comes teh ONILNE REDOLOGS.

when i look at v$logfile, i see that the online redologs entry is there.
BUT when i look at the physical location, i don't see them??
= = =

Also, TempFiles: do i need to create tempfiles before i open the db with resetlogs??
Re: after restore when trying to recover database.. it gives error [message #615352 is a reply to message #615350] Mon, 02 June 2014 15:42 Go to previous messageGo to next message
cakeday
Messages: 31
Registered: May 2010
Member
TEMPORARY TABLESPACE:

What should i do about the temporary tablespace situation? i don't seem to have a valid temporary tablespace and when i try to create one, it says DB NOT OPEN.

SQL> CREATE TEMPORARY TABLESPACE TEMP1 TEMPFILE '/p076/tmp001/temp001_data.dbf' SIZE 200M AUTOEXTEND OFF;
CREATE TEMPORARY TABLESPACE TEMP1 TEMPFILE '/p076/tmp001/temp001_data.dbf' SIZE 200M AUTOEXTEND OFF
*
ERROR at line 1:
ORA-01109: database not open
= = = =

when i look at v$tempfile, the tempfiles are from the source database.. PLEASE HELP!SQL> select name from v$tempfile;

NAME
--------------------------------------------------------------------------------
/p089/tmp001/tmp001_data.dbf
Re: after restore when trying to recover database.. it gives error [message #615353 is a reply to message #615352] Mon, 02 June 2014 15:46 Go to previous messageGo to next message
John Watson
Messages: 8922
Registered: January 2010
Location: Global Village
Senior Member
After an incomplete recovery, you must open the database with resetlogs. This is very basic database admin, have you read the relevant manual yet? http://docs.oracle.com/cd/E16655_01/backup.121/e17630/toc.htm
Re: after restore when trying to recover database.. it gives error [message #615355 is a reply to message #615353] Mon, 02 June 2014 16:10 Go to previous messageGo to next message
cakeday
Messages: 31
Registered: May 2010
Member
i know about the open resetlogs..

But since this DB was restored in a different location (e.g. from Prod to the Dev environment) -- do i need to do a RENAME on the tempfiles?

because what i see in the database and what i see on the physical server -- THE FILENAMES AND THE LOCATION does not match.

physical is under /p076/tmp001 (Target)
a52ulppci01:/p076/tmp001> ls -ltr
total 101386384
drwxr-xr-x 2 root system 256 Jun 26 2009 lost+found
-rw-r----- 1 oracle oradba 17301512192 May 30 12:24 tmp001_data_002.dbf
-rw-r----- 1 oracle oradba 17301512192 May 30 13:25 tmp001_data_003.dbf
-rw-r----- 1 oracle oradba 17301512192 May 30 13:26 tmp001_data.dbf

in the database i see he source location,
SQL> select name from v$tempfile;

NAME
--------------------------------------------------------------------------------
/p089/tmp001/tmp001_data.dbf
/p089/tmp001/tmp002_data.dbf
/p089/tmp001/tmp003_data.dbf


will the database OPEN without a temporary tablespace??
Re: after restore when trying to recover database.. it gives error [message #615356 is a reply to message #615355] Mon, 02 June 2014 16:32 Go to previous message
John Watson
Messages: 8922
Registered: January 2010
Location: Global Village
Senior Member
If you know about resetlogs, why do you ask this,Quote:
when i look at v$logfile, i see that the online redologs entry is there.
BUT when i look at the physical location, i don't see them??
However, it would seem from your lack of gratitude for my attempts to assist are valueless to you. Perhaps someone else will give you better advice.
Previous Topic: rman cold backups no catalog
Next Topic: ORA-19554: error allocating device, device type: SBT_TAPE
Goto Forum:
  


Current Time: Thu Mar 28 20:10:08 CDT 2024